About

Description
Iron Guard® is a high gloss, 100% acrylic, waterborne, corrosion resistant coating designed for new construction or maintenance use. Can be used directly over prepared substrates. Can be applied directly to new and clean metal without primer. Excellent adhesion. Excellent early moisture resistance. Flash rust/early rust resistance. For use over prepared substrates in industrial environments.
  • Category: Chemicals, Lubricants & Paints|Paint & Paint Supplies|Paints
  • Prop 65 Warning Message: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
  • MfgPartNumber: K11029101
  • MinimumOrder: 4
  • StandardPack: 1 GA
  • Applicable Materials: Aluminum; Concrete; Fiber; Iron; Masonry; Steel; Wood; Zinc
  • Applications: Construction; Industrial
  • Base Type: Acrylic Enamel
  • Capacity Vol. [Nom]: 1 gal
  • Chemical Compound: Propylene Glycol; Titanium Dioxide
  • Color: Yellow
  • Finish: High Gloss
  • Flash Point [Nom]: 200 °F
  • Full Cure Time @ Temp.: 30 d @ 77 °F
  • Odor/Scent: Low
  • Resistance: Chemical; Corrosion; Moisture; Rust; Salt Fog; Waterborne
  • Total Solids: 34% (Volume); 43% (Weight)
  • Type: Acrylic Enamel
  • VOC: <100 g/L
  • Viscosity [Nom]: 20.5 cSt
  • Wt.: 10.2 lb
Description
Iron Guard® is a high gloss, 100% acrylic, waterborne, corrosion resistant coating designed for new construction or maintenance use. Can be used directly over prepared substrates. Can be applied directly to new and clean metal without primer. Excellent adhesion. Excellent early moisture resistance. Flash rust/early rust resistance. For use over prepared substrates in industrial environments.
  • Category: Chemicals, Lubricants & Paints|Paint & Paint Supplies|Paints
  • Prop 65 Warning Message: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
  • MfgPartNumber: K11029101
  • MinimumOrder: 4
  • StandardPack: 1 GA
  • Applicable Materials: Aluminum; Concrete; Fiber; Iron; Masonry; Steel; Wood; Zinc
  • Applications: Construction; Industrial
  • Base Type: Acrylic Enamel
  • Capacity Vol. [Nom]: 1 gal
  • Chemical Compound: Propylene Glycol; Titanium Dioxide
  • Color: Yellow
  • Finish: High Gloss
  • Flash Point [Nom]: 200 °F
  • Full Cure Time @ Temp.: 30 d @ 77 °F
  • Odor/Scent: Low
  • Resistance: Chemical; Corrosion; Moisture; Rust; Salt Fog; Waterborne
  • Total Solids: 34% (Volume); 43% (Weight)
  • Type: Acrylic Enamel
  • VOC: <100 g/L
  • Viscosity [Nom]: 20.5 cSt
  • Wt.: 10.2 lb
Krylon® Industrial by Krylon® Industrial

425-K11029101

Krylon® IRON GUARD® Water-based Acrylic Enamels

$89.23
$89.23
$84.33
Investor focus research & development value proposition graphical user interface investor. Startup business plan user experience.
Investor focus research & development value proposition graphical user interface investor. Startup business plan user experience.

Check Out These Related Products