About

Description
High-density, ceramic bead-filled epoxy system for maximum wear and abrasion resistance in high-temperature applications. Heat-cured, trowelable system that gives up to 30% improvement over conventional wear compounds. Unmatched resistances to many acids, bases, salts, and solvents. 120-minute working time.
  • Category: Adhesives, Sealants & Tapes|Adhesive Products|Adhesives & Glues
  • Hazmat: Y
  • TestingAndApprovals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
  • Prop 65 Warning Message: WARNING: This product can expose you to Methyl Isobutyl Ketone, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • MfgPartNumber: 11480
  • MinimumOrder: 1 EA
  • StandardPack: 1 EA
  • Applicable Materials: Ceramic; Concrete; Most Metals
  • Capacity Wt. [Nom]: 30 lb
  • Chemical Compound: Epoxy
  • Color: Grey
  • Compressive Strength: 13,200 psi
  • Full Cure Time @ Temp.: 2 h @ 300 °F
  • Hardness [Nom]: 87 Shore D
  • Resistance: Hydrochloric Acid-10%; Sulfuric Acid-10%; Wear
  • Temp. Range [Max]: 450 °F
  • Wt.: 32 lb
Description
High-density, ceramic bead-filled epoxy system for maximum wear and abrasion resistance in high-temperature applications. Heat-cured, trowelable system that gives up to 30% improvement over conventional wear compounds. Unmatched resistances to many acids, bases, salts, and solvents. 120-minute working time.
  • Category: Adhesives, Sealants & Tapes|Adhesive Products|Adhesives & Glues
  • Hazmat: Y
  • TestingAndApprovals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
  • Prop 65 Warning Message: WARNING: This product can expose you to Methyl Isobutyl Ketone, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • MfgPartNumber: 11480
  • MinimumOrder: 1 EA
  • StandardPack: 1 EA
  • Applicable Materials: Ceramic; Concrete; Most Metals
  • Capacity Wt. [Nom]: 30 lb
  • Chemical Compound: Epoxy
  • Color: Grey
  • Compressive Strength: 13,200 psi
  • Full Cure Time @ Temp.: 2 h @ 300 °F
  • Hardness [Nom]: 87 Shore D
  • Resistance: Hydrochloric Acid-10%; Sulfuric Acid-10%; Wear
  • Temp. Range [Max]: 450 °F
  • Wt.: 32 lb
Devcon by Devcon

230-11480

Devcon Wear Guard™ High Temp

$1,009.85
$1,009.85
$0.00
Investor focus research & development value proposition graphical user interface investor. Startup business plan user experience.
Investor focus research & development value proposition graphical user interface investor. Startup business plan user experience.

Check Out These Related Products