About

Description
When applied in a 15-20 mil coating, this low-viscosity, alumina-filled, brushable epoxy compound provides a smooth, protective barrier against wear, abrasion, corrosion, erosion, and chemical attack. Low-friction surface reduces turbulence, wear, and cavitations. Outstanding chemical resistance to acids, solvents, and alkalis. 3 colors (red blue white) to insure uniform coating. Red and white formulas are acceptable for use in meat and poultry plants. White is NSF-certified for use in potable water applications. 40-minute working time (Red,Blue). 21-minute working time (White).
  • Category: Adhesives, Sealants & Tapes|Adhesive Products|Adhesives & Glues
  • Hazmat: Y
  • TestingAndApprovals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Accepted for Use in meat and poultry plants under the former USDA Food Safety and Inspection Service Product Approval Program; ANSI; NSF / ANSI Certified, Standard 61; Accepted for use in meat and poultry plants under the former USDA Food Safety and Inspection Service Product Approval Program; Certified for Potable Water Application; Chemical resistance was tested by immersion for 30 days at 75°F, after 7 days room temperature cure; NSF Certified, Standard 61, 10/93
  • Prop 65 Warning Message: WARNING: This product can expose you to chemicals including Ethyl Acrylate, which is known to the State of California to cause cancer and Toluene which is know to the State of California to cause birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
  • MinimumOrder: 1 EA
  • StandardPack: 1 EA
  • Adhesive Tensile Shear: 2,000 psi
  • Applicable Materials: Most Metals
  • Applications: Multi-Purpose
  • Capacity Vol. [Nom]: 2 lb
  • Capacity Wt. [Nom]: 2 lb
  • Chemical Compound: Epoxy
  • Compressive Strength: 15,200 psi
  • Curing Method: Heat Cure
  • Packing Type: Kit
  • Physical Form: Liquid
  • Resistance: Sodium Hypochlorite-5%; Trisodium Phosphate
  • Temp. Range [Max]: 350 °F
  • Tensile Strength [Nom]: 3,800 psi
  • Working Time [Min]: nan
  • Working Time [Nom]: 40 min
Description
When applied in a 15-20 mil coating, this low-viscosity, alumina-filled, brushable epoxy compound provides a smooth, protective barrier against wear, abrasion, corrosion, erosion, and chemical attack. Low-friction surface reduces turbulence, wear, and cavitations. Outstanding chemical resistance to acids, solvents, and alkalis. 3 colors (red blue white) to insure uniform coating. Red and white formulas are acceptable for use in meat and poultry plants. White is NSF-certified for use in potable water applications. 40-minute working time (Red,Blue). 21-minute working time (White).
  • Category: Adhesives, Sealants & Tapes|Adhesive Products|Adhesives & Glues
  • Hazmat: Y
  • TestingAndApprovals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Accepted for Use in meat and poultry plants under the former USDA Food Safety and Inspection Service Product Approval Program; ANSI; NSF / ANSI Certified, Standard 61; Accepted for use in meat and poultry plants under the former USDA Food Safety and Inspection Service Product Approval Program; Certified for Potable Water Application; Chemical resistance was tested by immersion for 30 days at 75°F, after 7 days room temperature cure; NSF Certified, Standard 61, 10/93
  • Prop 65 Warning Message: WARNING: This product can expose you to chemicals including Ethyl Acrylate, which is known to the State of California to cause cancer and Toluene which is know to the State of California to cause birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
  • MinimumOrder: 1 EA
  • StandardPack: 1 EA
  • Adhesive Tensile Shear: 2,000 psi
  • Applicable Materials: Most Metals
  • Applications: Multi-Purpose
  • Capacity Vol. [Nom]: 2 lb
  • Capacity Wt. [Nom]: 2 lb
  • Chemical Compound: Epoxy
  • Compressive Strength: 15,200 psi
  • Curing Method: Heat Cure
  • Packing Type: Kit
  • Physical Form: Liquid
  • Resistance: Sodium Hypochlorite-5%; Trisodium Phosphate
  • Temp. Range [Max]: 350 °F
  • Tensile Strength [Nom]: 3,800 psi
  • Working Time [Min]: nan
  • Working Time [Nom]: 40 min
Devcon by Devcon

230-11770

Devcon Brushable Ceramic

$300.48
$300.48
$227.96
Investor focus research & development value proposition graphical user interface investor. Startup business plan user experience.
Investor focus research & development value proposition graphical user interface investor. Startup business plan user experience.
Dielectric Strength:
Color:

Check Out These Related Products